Steering

The steering consists of a Flaming River 32" Tilt column with Billet Ali Column drop and floor mount.

 

Here you can see the column in place.  I made the plate on the floor to replace the original.  I have positioned the column central to the Dash hump.  You can see the Billet Ali floor mount and the Ali column drop.  Unfortunately I ordered the wrong drop as it is brushed finish and not polished.

 

Column and Rack in their correct positions.  Just the connecting shaft to be cut to length now.  Note the engine mount cut away to clear the Universal joint connected to the Steering rack.

 

 

The shaft cut an in place, I turned the column centre a few turns just to make sure that there was good clearance all round.